KLD NEW PB-1/ATP 100 100 WATT ATTENUATOR SAVE YOUR CRANKED TUBE TONE RED BURST CASE COLOR!

Price: $179.88
(as of Jul 10, 2022 15:21:23 UTC – Details)

NOW FOR A LIMITED TIME…. FREE QUALITY SPEAKER CABLE INCLUDED! Attenuation: This is a rotary switch that selects the amount of attenuation. Min position is true bypass. Positions 4-1 adds 1.8 dB of attenuation per click. Studio Level: A rheostat that will adjust the amp’s output from -7.2 dB down to -30 dB. The PB1 attenuator was designed to let you maintain your amp’s tube tone at higher volumes where the tubes really start to sing and great dynamic responses are created, while keeping the overall volume under control.On stage, at home jamming or especially in home studios to really attenuate the overall volume down to 1 watt or less (amp less 100w) The PB1 gives you unlimited flexibility for different volume levels. The PB-1 is designed for up to 100 watt max tube amplifiers only. This is a resistor-based model like Dr. Z and other quality attenuators that hooks in line from the speaker to the head not in the effects loop etc. Note*** always use a good quality gauge speaker cable for this connection. This model will also work with any standard ohm speaker rating 4-16 ohms. (Plug and Play) All alloy case lets the PB attenuator dissipate heat very easily. Top Controls: Attenuation: This is a rotary switch that selects the amount of attenuation. Mini position is true by¬pass. Positions 4-1 adds 1.8 dB of attenuation per click. Studio Level: A rheostat that will adjust the amp’s output from -7.2 dB down to -30 dB. Side Jacks: IN: Connect a speaker cable from this jack to your amp’s speaker out jack. OUT: Connect a speaker cable from this jack to your speaker cabinet. It is optimal to match your amp speaker out to the external speaker rating. (ex: 8 ohm speaker out jack on amp with 8 ohm speaker cab.)
The PB1 attenuator was designed to let you maintain your amp’s tube tone at higher volumes where the tubes really start to sing and great dynamic responses are created
Works on all standard ohm ranges from 4-10 ohms
Simple and effective design. In-line from Speaker to Head. Up to 100 watts.
All alloy case lets the PB attenuator dissipate heat very easily.