P Bass Humbucker Pickups Prewired Harness Set with 1T1V 1Jack, Variable Gauss Ceramic Traditional Precision 4 String Bass Pickups Set for PB Style Electric Bass, Black
(as of Jul 10,2022 01:56:05 UTC – Details)
If you are after giant heavy low end growl, look elsewhere. If you are after a sweet, Motown-esque feel, stop right here.This is a vintage output, the spring inside the foam to give the pickup a very secure mounting setup. There are other more expensive pickups that you might prefer, but you might also find that you prefer this one over ones that are more expensive if you prefer a vintage sound.It provides slammin output while retaining singing highs, aggressive harmonics, and just the right blend of sustain and distortion. Goes from sweet warm tones to raw rock ‘n’ roll.If you have a bass and the pups aren’t doing it for you, try these, you might be pleasantly surprised.
– Triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise.
– Bass frequencies keep their deep growl while the treble sounds are smoother but still defined.
– Large quarter-inch wide pole pieces expand the magnetic field and extend the frequency range from low to high end for a fat, full, punchy sound with midrange presence.
– Position: Bridge, Neck
– Resistance: 8-9K.
– Cable Length：334mm/13.14inch
How to install?
Installation was a cinch as the P bass has its 2 pups wired in series, these pups came already wired and soldered to the pots and jack exactly. You only need to make sure that pick guard is tight on these, and require some modification though you could open the pups hole up just a little bit, if you don’t want to butcher your pick guard, you can use a fine file and just gently take off a few thousands off each side of the hole. If you want to raise these pups after install, you might have to pull them up with your fingers after loosening the screws, as they’re tight enough, they won’t float back up on their own without a little tug.
2 * prewired P Bass Humbucker Pickups with 2 pots and 1 jack
3 * washers
3 * nuts
4 * Springs and 4 screws
Covers are made of ABS material, ceramic magnet, durable to use, sealed humbucker are triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise.
Classic Tone with New Var-Gauss Technology: Bass frequencies keep their deep growl while the treble sounds are smoother but still defined, the prewired harness with 250K pots, to be smooth out the highs.
Each Double Coil Pickups Size: 70*27*14mm/2.76*1.06*0.55in, total weight: 130g/4.59ounces, Color: black, Pole pieces: 4 flat pole piece. Pole spacing: 28.5mm/1.12in
Package Includes: 2 P Bass pickups with 2pcs potentiometers, 3 washers, 3 nuts, 4 Springs and screws. (As with all bass pickups, please be very gentle with the flimsy mounting screws and use the correct sized screwdriver. Put a little soap on the threads before you screw them in, and don’t strip the heads.)
Be the first to review “P Bass Humbucker Pickups Prewired Harness Set with 1T1V 1Jack, Variable Gauss Ceramic Traditional Precision 4 String Bass Pickups Set for PB Style Electric Bass, Black”
You must be logged in to post a review.
There are no reviews yet.