Sealed Humbucker Double Coil Pickups Neck&Bridge Pickup Replacement for Gibson Les Paul LP EPIPHONE Electric Guitar Parts, Gold with Black Frame
(as of Jul 11,2022 00:26:56 UTC – Details)
Two complete humbucker pickups loaded in shiny cases. One labeled N for the neck and one labeled B for the bridge with wires attached for easy hook up. You will have to solder them to your existing wires to the volume and tone and three way switch cover with heat shrink or electic tape to prevent shorting.
If you’re expecting gold humbuckers– this is your search criteria.This humbucker pickup are the ultimate for high output and clarity. The noble and atmospheric look is even more attractive and the neck pickup is boisterous and full and the bridge pickup is light and bright.Each pickup includes height adjusting screws and springs to eliminate any unwanted feedback and noise.The mids are a perfect mix. Once you find the right height for your pickups, it’s game on! You’re rockin!
– The humbucker pickup can sparkle and smooth sound these produce.
– It use Shielded Wire instead of the Flimsy Two-part Wire, safe wiring with good noise protection.
– Sealed humbucker are triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise.
– Each pickup includes height adjusting screws and springs.
2 x sealed humbucker pickups
8 x screws
★How much soldering, if any, is involved?
Soldering is involved but not much. Each pickup has two wires(Shielded Wire) that need to be soldered. Pretty easy if you have experience with soldering. You can find videos on youtube that show you step by step how to do it. The cheap pencil type soldering iron will work fine, just make sure you are using electrical solder and not the solder used for plumbing ect. If you are replacing existing pickups you can simply snip the wires and splice these in (just make sure you connect ground to ground and hot to hot).
★Are they active or passive pickups? (do they requires batteries)
They are Passive pickups, no need require batteries and have a nice round sound.
The pickups are microphonic,PVC coated magnet wire, ceramic magnet, two conductor, dual coil humbucker pickups are triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise.They sound strong and relatively uncolored, and the neck pickup is very jazzy sounding!
The shell of pickup is made of metal, durable to use, and the inner shell is made of ceramic magnet, use shielded wire to instead of the flimsy two-part wire, eliminate noise and to play mostly very cleanly. The noble and attmospheric look is more attractive, gold is better match with maple and ebony plates.
Size: 91.1*45mm/3.58*1.77inch; Neck pickup pole spacing: 50mm, Bridge pickup pole spacing: 52mm. Resistance：8.2K-15K, prewired cable length(N&B):300mm /11.8inch
Package Include: 1 neck pickup, 1 bridge pickup, 8pcs height adjusting screws and springs. The bridge has a red wire prewired, and the neck has a black wire prewired.